This is the classic printer test image from PhotoDisc International (PDI) — an industry-standard test file with a range of tones and colours, including skin tones, deep blacks, varying levels of saturation and shadow detail, that make it useful for evaluating a print workflow.
Why Use a Standardised Test Image?
It's genuinely useful to evaluate your print workflow with an image that isn't your own work. Using a standardised test file removes any issues or mistakes already baked into your own files from the evaluation — so if something looks wrong in the print, you know it's coming from your printer or profile setup, not from the source image.
You can download the test image above to check your own printer and profile setup. You can also purchase a print of this image made on a properly profiled setup here at Image Science, to compare directly against your own results.
What to Check in Your Print
- Check the assorted skin tones of the four people at the bottom for realistic colour and smooth gradients.
- Look at the circuit board in the upper left-hand corner to check for open shadows and believable colour in the shadow areas.
- Make sure the flowers show sufficient, but not extreme, colour saturation.
- Check the purple embroidery at the centre for a reasonable purple tone, with no ink bleed blocking the gold stitching.
- Natural greens should be present in the cactus and sunflower leaves.
- The saddle blanket on the small elephant should not black up with excess black ink — the gap between the elephant and the wall should be visible.
- The red robot should be brilliant, and the coloured beads should show good spectrum colours.
- The sand in the fish bowl should be a rich dark purple, not dull grey or near black.
Evaluate and Improve Your Own Print Setup
If your test print doesn't match up on these points, the cause is usually an inaccurate or missing printer profile rather than your printer hardware itself.
- Browse test charts and colour-management tools in our Colour Charts & Tools collection.
- Get your own printer accurately profiled with our Custom Printer Profiling service.
Related Reading
- Calibration Versus Profiling — what each process actually does.
- The Fundamental Differences of Screen-to-Print Comparisons — why screen and print will never match perfectly.