We've written this article to help you get started with your new monitor as easily as possible. It covers unpacking, cabling, checking your new screen over, and calibrating it – with some trouble-shooting tips if you get stuck. It also points to a lot of other related content in our knowledge base that you can refer to as you go.
These instructions are written as a general guide to all of our monitors. Given these are a general set of instructions, follow the spirit of the instructions more than the letter if they don't match up exactly with what you have in front of you.
Unboxing Your Monitor
Orient the box so that it's standing up with the opening at the top. Carefully cut the tape holding the box together, making sure you don't cut through to anything underneath (i.e. use a small blade to do this, not some great big machete!).
When unpacking everything, do your best to keep everything as intact as possible, just in case of any warranty issues and the like – it's much more difficult when things have been torn apart or the box destroyed. Hang on to the box for several weeks, at least until you're comfortable that the monitor has settled in nicely.
After you've opened the box, sitting at the top on some foam, you will typically find a bunch of cables, some manuals and discs. Put these to one side, and then remove the top foam. If your monitor comes with a separate stand, assemble this now using the instructions in the box – you want it ready for when the monitor comes out of the box.
The next step is easier if you have someone helping you, and we suggest taking off any rings/watch etc you might be wearing as they might scratch the screen if you happen to slip. Reach in and get your hands under the bottom of the monitor's bezel, taking care not to touch the screen itself. Lift the monitor gently out of the box while supporting both sides of the bezel from underneath (it may resist slightly as it comes free from the foam). The key is to make sure you are carrying the weight of the screen by the bezel and that you do not put any pressure on the delicate LCD surface itself.
Put the monitor down gently, resting it on its stand on a stable, flat surface. Now remove any foam wrappings and the cardboard sheet that covers the screen. Check the monitor carefully for signs of physical damage – they're packed very well, so it's very unusual to see any issues at this stage.
Cabling Your Monitor
A monitor may need up to three cables plugged in:
- Power Cable (almost always a standard 'kettle plug')
- Video Connection Cable
- (Only some models, and only if not using USB-C for video) – a separate USB cable for data communication during calibration & to enable the USB hub if there is one
All of these should generally be in the box with the monitor if required for that model. However it may be that you need a particular cord that is not included – feel free to ask Image Science for advice if anything is still unclear once you've read the sections below. Your computer should be switched off while you plug everything in.
Very occasionally, because these come from overseas, the Australian power cord is not to be found in the box. If so, please contact us and we'll send you a cord, but in the meantime it's a standard 'kettle cord', the same as goes into almost any electrical device such as computers and (surprise!) kettles. Feel free to borrow one from another device or if you're really desperate to get going, any normal supermarket has these for sale for a few dollars. But do let us know and we'll make sure you get a cord.
Make sure you push this in firmly. If you later hear any crackling type noises when using/adjusting/moving the monitor, it almost always means this cord isn't actually in properly.
If you're not sure about what these connectors are, or look like, your monitor and computer manuals should have info about this, and we also have a comprehensive guide.
In order of quality & convenience, best to last, use the following connections if available to you:
- USB-C [digital]
USB-C with monitors carries a DisplayPort signal (so it's functionally equivalent to the next option for video, but USB-C can also carry audio and data over the same cable). In some cases, if the monitor offers this, this same cable can even carry power back from the monitor to the attached computer (e.g. a laptop), making for the ultimate one-cable hook-up! - DisplayPort [digital]
- HDMI [digital]
- DVI-D [digital] – Highly prone to issues due to the exposed pin design – do your best to avoid this if possible!
- VGA [analogue] – WORST – really at this point no-one should be using this.
It's a question of looking at the inputs your monitor accepts, and the outputs your computer has. We very strongly recommend you connect your monitor using a digital connection – so USB-C or DisplayPort ideally, then HDMI or DVI.
Almost any modern computer or laptop (apart from very basic netbooks) will have at least one form of digital output, usually HDMI with PC laptops and USB-C or Mini DisplayPort with Mac laptops. If you're using a machine that has an HDMI output, you may need to purchase an HDMI to DVI (or DisplayPort) adapter – these are available from pretty much any computer store or place like Jaycar, JB HiFi etc. We like the online store www.cablechick.com.au.
Many monitors have a USB connection in addition to power and video. If this is offered, and you're not using USB-C to USB-C as your video connection (in which case the USB data can also travel over this one cable) – then you should definitely also plug it in, as (if available) the direct hardware calibration system works across this cable, so it is an essential connection (Eizo CG and BenQ SW/PV monitors, for example). Typically the screen will have downstream ports as well, so you can then plug your calibrator and/or mouse/keyboard into the monitor if you wish.
Occasionally the monitor makers leave the USB cord out of the package as not everyone needs it (e.g. if you're not calibrating the monitor). In this case, you will need to buy a standard USB cord or search your cupboards for one (usually called a 'USB printer cable' – one end is the standard flat rectangular USB fitting, and the other the square-ish fitting you find on the back of printers, hence the name).
Powering On and Checking the Basics
It's time to turn everything on and do some basic checking. Turn the monitor on first (often there is a hard power switch at the back or side of the monitor that also needs to be turned on in addition to the front power switch). You should see a little LED light on the front of the monitor in most cases. The reason we want the monitor to be on is that when the computer first turns on, it will query the monitor about its capabilities and the monitor needs to be on to respond.
If it doesn't appear to turn on, check the power connection very carefully at both ends, particularly the monitor end as often the sockets can be a little tight at first.
Your computer should start to boot and you should see output on the screen. If the monitor appears to turn itself off, and/or you see any 'no signal' errors – believe the monitor! This message means the monitor is not getting an appropriate signal from the computer. Triple check your connections, and be sure that your computer supports the monitor you have bought (e.g. some laptops will not output to screens bigger than 24"). On some old PCs, you may have to go into the BIOS and tell it to 'init PCI graphics first' or similar if you have built-in graphics and an external video card.
N.B. In particular, BenQ monitors need to be manually told which input to look at.
Drivers and Utility Software
Note: we are talking about general software at this stage, not calibration software – that's covered below.
Your monitor may have come with a disc. This disc typically contains a PDF manual, possibly some driver files, and some utility software such as picture-checking software or utilities that let you control the monitor's functions (brightness etc) via software rather than the monitor's actual buttons. It's up to you whether you install this or not – it can be useful but it's generally not essential – we generally don't bother with it.
Generally, you don't need to install drivers for monitors. Modern video cards communicate directly with the monitor over the digital connection, and should retrieve all the information your system really needs to get going. That said, you can run into instances where drivers and general software updates can be handy.
Here's where to get them:
- Eizo General Software Download (for Windows, if you need .INF driver files – these come with the ICC profiles, but they are generally not needed).
- BenQ – you need to visit the individual product pages on benq.com.au.
Checking Resolution and Pixels
There are two basic checks to make – one is for native resolution (so you get the best sharpness) and the other is for pixel checking if your monitor came with a dead pixel warranty.
(Resolution – the number of pixels being sent to the monitor, given as horizontal by vertical – e.g. 1920 by 1200 pixels.)
Once the boot is finished, we want to check the monitor is getting the correct resolution sent to it. This is critical for getting the best, sharpest display from your monitor (it's not like the days of CRT monitors when you could choose whichever resolution you liked – LCD monitors are very fussy about getting one native resolution and just don't look right unless they get that resolution).
You will need to know what this native resolution is, by checking your monitor specifications (see our website or your monitor's manual). Here are some common resolutions though:
- 22"/23" Widescreen Monitor – Normally 1680 by 1050, sometimes 1920 by 1200
- 24" Widescreen Monitor – Almost always 1920 by 1200
- 27" Widescreen Monitor – Usually 2560 by 1440
- 30" Widescreen Monitor – Usually 2560 by 1600
- 24, 27 & 32" 4K Monitor – Usually 3840 by 2160
- DCI-4K (AKA True 4K) – Usually 4096 by 2160
You should check in your display preferences that the resolution your system is set to is a perfect match for the monitor's native resolution. Install the latest drivers for your video card, and then reboot your machine – with any luck you will now be able to choose the appropriate native resolution for your monitor.
If your monitor comes with a dead pixel warranty, you should now check for stuck pixels. Remember you have often only got coverage for this for the first two weeks or 100 hours, so check this straight away and you might want to repeat the check after you've had the screen for a week. Eizo CG monitors now have 6 to 12 months for dead pixels, and BenQ SW/PV monitors have 6 months. As always, do check directly with the manufacturer for current terms and conditions.
To check for dead or stuck pixels is easy – simply set your desktop to White, Black, Red, Green and Blue, each time checking carefully across the display for visible dots – dead pixels will be permanently dark, otherwise you may see stuck pixels – white, red, green or blue. Check very carefully that anything you see isn't just a dust spot or similar. You can sometimes make out slight imperfections in the pixel grid itself, but these don't affect the display and generally aren't visible from 10cm or so away, so check very carefully before you conclude you have a pixel issue – about half of all monitors returned due to a pixel issue are in fact just suffering from easily removable dust spots!
Fortunately both Eizo and BenQ have very good checking so it's really rare that you'll actually see a dead pixel, but very occasionally one can still slip through the net. If you do have one (& your monitor came with a dead pixel warranty), contact us and we will arrange for a replacement monitor.
Calibrating Your New Monitor
Now that we've got past all the basics and the monitor is working in the broader sense, it's time to get the very best (most accurate) picture from the monitor. We have lots of content about calibration – you'll need to choose the relevant guide for your monitor and calibrator combination.
If you bought an Eizo ColorEdge Monitor, you will have received a disc from Eizo. We advise you download the latest version of ColorNavigator straight away, as the disc is often a few months old by the time it reaches you. Install ColorNavigator (and don't install the software that came with your calibrator – ColorNavigator includes its own drivers for compatible calibrators).
BenQ SW Monitors use Palette Master Elements. PV series monitors use Palette Master. Both are available via the product pages on benq.com.au – note that there is only one version of the software, so if for whatever reason you can't find it on the page for your particular model, just visit another model from the same range and you'll find it there.
If you don't have a monitor capable of direct hardware calibration, use the disc that came with your calibrator to install your calibration software, and use a standard software-calibration guide (i.e. calibration that works through the video card, not in the monitor itself).
Our guide to preparing for monitor calibration is a good next step once your monitor is set up and settled in.
Troubleshooting Uniformity Issues
Most monitors do not come with uniformity guarantees, and it is one of the things that can still, on rare occasions, be noticeable and frustrating on LCD screens. That said, they are definitely improving as time goes on – the old CRT screens, even top CRT monitors, had quite gross uniformity errors, and in reality uniformity issues are not usually such a big deal in practice with LCDs.
If you are having a uniformity issue, first make sure that if your monitor has a uniformity compensation system, that this is turned on and set to maximum. You can check your monitor manual for how to do this. Try a lower brightness, as very high brightness levels (140+ cd/m² and over) tend to significantly increase uniformity issues. Calibrate your monitor, preferably using direct hardware calibration if your model supports it.
Also, it's best to let the monitor settle in for a few days before making judgements. Remember that even if your greys are slightly non-neutral, this won't affect your prints – it's just a slight cast in the on-screen image representation, not the image itself. Try working with the monitor for a while, as you may very well find it does not cause a significant practical issue in day-to-day work.
If after all this you feel you have a significant issue with uniformity that will seriously impact your work with the monitor, then you will need to discuss this with the manufacturer, as it's not normally covered under warranty (unless you have an Eizo CG monitor).
Getting Support
If you have any problems setting up your monitor – not to worry, most problems are easily solved. You are always welcome to contact us for support, and BenQ and Eizo are very good at supporting their customers directly too.
If your issue appears to be hardware related (e.g. dead pixels or other hardware faults), we'll usually suggest you contact BenQ or Eizo for direct hardware support – you'll generally get a quicker result going down this avenue first, though we're happy to liaise on your behalf if needed.
If your issue is to do with software, configuration, set up or odd behaviour, please contact us via tech support, and supply as much information as you can about the issue.
Related Reading
Shop Monitors and Calibrators
- Colour Accurate Monitors – our full range
- Monitor Calibrators – to get your new screen properly calibrated