From CRT to LCD: Why Monitors Flicker
Back in the dark ages of CRT monitors, flicker was a constant problem. CRT monitors, put simply, worked by using a ray of electrons to excite excitable phosphors to display colours. The electron beam would sweep, in lines, back and forth across the display from top to bottom. This refresh cycle would occur at various speeds depending on the quality of monitor you had and the resolution you were running on it. A lot of monitors refreshed at 60Hz, meaning flicker was constant, especially to those of us with sensitive eyes.
Better CRTs offered 85Hz, 100Hz, even 120Hz refresh cycles. These were a lot more stable and comfortable to use, but if you looked 'off axis' – i.e. with the side of your eyes – you could still easily see the flicker. (If you recall old video footage of monitors with nasty looking flicker, this is because of the correspondence between the video frame rate and the monitor flicker rate. That is, say you're recording at 30 frames per second, and the monitor is refreshing at 85Hz, some of your 30 frames on the monitor will be lit, some won't, some only half lit etc, so you get the weird half-lit horrible flicker issue you see on a lot of old documentaries!)
Now – LCD monitors, those with fluorescent lights at least, pretty much solved this issue. LCD monitors are, in essence, a bunch of tiny colour filters in front of a light source – the backlight, as it is termed. The backlighting used in these was effectively steady, so no apparent flicker. Bliss, and much less eye fatigue! But in truth they did have their own flicker issue, just well masked by an aspect of the behaviour of fluorescent lights.
How PWM Causes Flicker on Modern LED-Backlit Monitors
Here's how: with LCD monitors, brightness is mostly controlled with a cheap, cheerful and generally effective technique known as PWM.
Pulse Width Modulation works by essentially powering the panel on and off very quickly – so quickly the eye can't really see it (up to hundreds of times per second) – and the lower the brightness you want, the longer the "off" cycles are relative to the "on" cycles. This happens many times per second, and it's what causes the apparent brightness of the screen to drop (which is a good thing for print work, and for eye fatigue in general). With fluorescent backlighting, the fluorescent lights kept glowing in between cycles, so you didn't really get flicker from this method of brightness control – the panel remained lit to the eye the whole time.
Now that monitor makers are swapping fluorescent backlights for LED backlights, the picture has changed. LED backlights use a lot less power, can be controlled individually (which helps with uniformity), and can improve white point control – so in most ways they're a very good thing. But LED lights exhibit near-instant on/off behaviour. So if brightness is still controlled using PWM, the screen will unfortunately exhibit flicker again as you head towards lower brightness, because those longer "off" periods become visible to the eye. Unfortunately, PWM circuitry has come along for the ride with most LED-backed monitors, most likely because it's known to work and is very cheap to implement.

PWM Behaviour
Who Notices Flicker, and Why It Matters
Different people have very different sensitivities to this – for maybe 95% of people it's really no issue at all, or only an issue if they want to do something unusual like run their screen at very, very low brightness (sub 60 cd/m²). But there's a small percentage of people who are deeply bothered – either consciously, by seeing the flicker, or more commonly sub-consciously through eye fatigue and headache issues. This type of flicker can be a real trigger for migraines, which are never good.
Anti-flicker and low blue light technology was originally invented by BenQ, and all the BenQ monitors we carry (the SW and PV lines) have these technologies. Combined with their great value and excellent colour reproduction, we think these monitors are an ideal choice for eye-sensitive imaging enthusiasts.
How to Check Your Own Monitor for Flicker
Here's an easy way to assess the flicker of your current screen: take your mobile phone and put it in camera mode. Hold it to your screen, and then run the brightness down from 100 to 0 percent. You will almost certainly see flicker via the camera display at some point, even on screens specifically claiming to be flicker-free, at very low brightness. Of course this just tells you whether there is flicker, not whether you're sensitive to it.
For a deeper technical dive into PWM, TFT Central has a detailed article, along with some useful tips for reducing it.
Choosing a Flicker-Free Monitor
If flicker sensitivity, eye fatigue or migraines are a genuine concern for you, the simplest fix is to start with a monitor built to minimise it. BenQ's SW and PV series monitors use BenQ's own anti-flicker and low blue light technology from the ground up – and on top of that, they're accurate, well-priced monitors for photography and print work in their own right.
- BenQ SW272Q 27" 2.5K Monitor – a current PhotoVue model with flicker-free backlighting and hardware calibration
- BenQ PhotoVue Monitors – BenQ's full flicker-free, low blue light photography range
- Monitor Recommendations – our current picks across brands, if you'd like a second opinion before buying
- All Colour Accurate Monitors – browse our full range