USB is a protocol replete with issues - particularly on Windows, which has a notoriously finicky USB/driver implementation.
Calibrators in particular tend to be problematic, since they're power-hungry devices. If you're using an unpowered USB hub, or an under-powered port on your machine, you may see odd and intermittent issues with your device.
Here's some general advice for getting the most reliable results with USB devices, and some methods for confirming your computer is successfully recognising your USB device.
General Advice on USB
Here's a few basic things you can do to make it much more likely your USB device will work, and work reliably.
If you're having issues with a device, the first thing to do is simplify your setup. Start by rebooting your computer, unplugging all other devices you don't absolutely need (just temporarily), and generally making things as simple as possible - for example, only open the software you actually need for testing, to avoid potential software conflicts.
Once you have your device working correctly and have established the cause of the issue, you can re-integrate it into your normal setup.
More specifically:
- Avoid hubs if at all possible, particularly unpowered hubs. Hubs bring all sorts of potential complications with them.
- Connect the device to a port directly on your computer (on a desktop, ideally a port on the rear of the machine). Don't use a downstream port on your monitor or similar - these can have connection issues of their own.
- Avoid USB extension cables - even short ones can regularly cause issues. If you must use one, get a high-quality cable, and if it's longer than 2m, use one with a USB repeater built in.
- USB is vulnerable to sleep issues - reboot your machine with the device unplugged, then plug it in immediately after boot up (and check the computer recognises the device using the methods below). Don't let the computer sleep during your testing.
If you're still having issues, verify your computer is successfully recognising your USB device using the guides below.
Checking USB Devices on a Mac
To confirm that macOS detects your USB device:
- Click the Apple icon.
- Click About This Mac.
- Click More Info or System Report.
- Under the appropriate heading, confirm your USB device is listed and there's no error shown. (If you're not sure which heading it belongs under, look under each one.)
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Checking USB Devices on a PC
You can use PowerShell, a free program called USBDeview, or the classic Windows Device Manager. We recommend PowerShell (available on every version of Windows since 7) or USBDeview for this - Device Manager is a bit clunky and can involve a lot of searching around.
Using PowerShell
The best and most reliable way is to use PowerShell:
- Launch PowerShell (or Windows Terminal with the "PowerShell" profile) - just click the search icon in the Taskbar and type "powershell".
- Enter the following command (copy and paste it to avoid typos):
Get-PnpDevice -PresentOnly | Where-Object { $_.InstanceId -match '^USB' }
You'll then get a list of detected and working USB devices, something like this:

Using USBDeview
NirSoft have a very handy free program called USBDeview for viewing USB devices. It's free, and you can get it here.
USBDeview shows all USB devices connected, and in theory even those previously connected - it's almost too comprehensive in the information it provides. We suggest sorting by the "Connected" column, which groups the currently connected devices (highlighted in green).

Using Device Manager
Device Manager is the long-standing way of viewing hardware devices on Windows - it's been around for about as long as Windows itself, and unfortunately, it shows.
You generally need to know what type of device you're looking for, but where a device appears can be a bit abstract - meaning you often have to look in several places (or, worse, all of them) to find it, which isn't especially helpful when you're just trying to determine whether a device is being properly detected.
To open Device Manager, start typing "Device Manager" into the Windows search tool and it will come up in the list.
As you plug and unplug your device, you should see the Device Manager view flash as the list changes. You might have to search through several nodes to find where your device is actually listed (and to check for any reported issues) - Device Manager is notoriously inconsistent about where it places things. Here, for example, is a mouse listed under the Keyboard section:

Look for categories like "Imaging Devices" or "Digital... (whatever)", as well as, of course, any "USB... (whatever)" entries.
Send Us Screenshots
If you're after help with hardware bought from Image Science, and you can't work out what these tools are telling you, please send us screenshots of the output to review. See our guide on how to take screenshots on a PC or Mac if you're not sure how.
Shop Monitor Accessories
- Monitor Accessories - cables, hoods and other accessories for a reliable, colour-accurate monitor setup.