A Benchmark Film Scanner
The Imacon Flextight 949 is a superb scanner offering a dynamic range of 4.4 and excellent sharp results for prints up to large sizes. It was the last Imacon-branded scanner released before the merger of Imacon and Hasselblad, and is significantly better than even previous Imacon scanners. In terms of shadow penetration, sharpness and low noise, it's one of the best scanners on the planet and easily competes with any other scanner available. The technology in the 949 is as good as, if not better than, the now rebranded Hasselblad X5 machines.
Imacon Flextight 949 versus Drum Scanners
Landscape photographers are as picky about print quality as anyone. The production benefits of the Imacons, and the superb quality of their results, are hard to argue against. While some drum scanners technically offer better specs on paper, the reality is that very few people seem able to achieve optimum results with these machines in actual practice, and because your images must be oil-mounted, there are real disadvantages to the process. Drum scanning can also be very expensive.
The Imacon Flextight has been described by some as a drum or "virtual drum" scanner, in that the film is bent over a curved surface to produce scans with perfect edge-to-edge focus. This is essentially the same process used by drum scanners such as Howtek or Tango — the main difference is that the sensor in the Imacon is not a PMT (photomultiplier tube) but a CCD. CCDs are inherently slightly noisier than PMTs, but in practice the very high quality CCD inside the Imacon produces results which, in print terms, stand up to anything we've ever seen scanned in Australia.
Imacon versus Flatbed Scanners (Epson 2450, 4870, 4990, V700 and Similar)
If you're making small prints from a flatbed scan, you may find the results "sharp enough", but compared to scans done on the Imacon Flextight 949 they're quite noticeably soft. Sharpness is only one issue, though — what you might not immediately notice is the tonal compression and colour banding that results from a flatbed's cheap sensor. This produces images that lack three-dimensionality and have poor shadow penetration. It's less immediately obvious than the sharpness gap, but it's arguably an even bigger problem, and it's quite visible once you actually print.
If you're taking the time to shoot medium or large format, then to get truly fine prints, the whole chain needs to be right — good technique during image creation and capture, through good processing, good scanning, good digital file handling and final output. If you use a flatbed scanner in the middle of that chain to create low quality files, you're going to end up with amateur results no matter how good the rest of the process is.
Next Steps
- Order Film Scans — put the Imacon Flextight 949 to work on your own negatives or transparencies.