Why Double-Sided Printing Is Tricky
Making double sided inkjet prints can be quite difficult. The problem isn't the printing itself - it's what happens to the first side while the second side goes through the printer. Rollers, suction, and handling can all leave marks on a surface you've already spent time and ink getting right. Here are some tips to make the process a little smoother.
Our Tested Tips
- Use a smaller inkjet printer like the Epson SureColor P800 or smaller to do this successfully - the suction systems on the large format roll printers are too strong and cause significant abrasion to the back side of papers.
- Allow plenty of time for the whole print run - it's best to leave your prints for at least 24 hours and ideally some days before printing the second side, so the ink is properly dry and less easily marked.
- After printing the first side, coat that side in Hahnemühle Protective Spray - this provides good protection against marks when printing the reverse side.
- Print the lightest image side first - light scratch marks from rollers will be much more visible in dark prints, so put your darker image through last.
- Practise your print process with cheap plain paper first and keep good notes on paper loading orientation, as it's easy to get confused with this!
Or Skip the Trial and Error Altogether
Double-sided printing is one of those jobs where a small mistake on side one ruins side two as well, so it's worth getting right. If you'd rather not risk a sheet of good paper working through it yourself, we can print double-sided jobs for you on our calibrated large format printers, using the paper handling and drying time this process needs to come out clean on both sides. Head to our Order Prints page to send us your files, and check our file preparation guide if you're setting the files up yourself first.