Your First A4 Print is On Us. Learn More

Please make an appointment before visiting the studio - other than your order collections.     PH: 03 9329 4522

Welcome to the new Image Science website!

Custom Paper Sizes - Image Centering & Printing Full Bleed

Photoshop print settings dialog used to nudge and centre an image on custom paper size

Why Custom Sizes Print Off-Centre

When printing with custom paper sizes, your image can sometimes come out off centre. This happens because the printer driver factors in its own minimum margin width and can miscalculate the dimensions, shifting the whole image slightly on the page.

How to Get Your Image Properly Centred

We use the following method to improve our results:

  1. Cut some basic blank paper down to the size you want to test, rather than using your good (and expensive) fine art paper. Be precise — use a guillotine — so you get as close to your final size as possible.
  2. Create a document in Photoshop that is at least 1cm bigger than your paper size.
  3. Fill this document with black.
  4. Using a low quality mode in your printer driver, print this image. Photoshop will warn you the image will be clipped — click OK.
  5. This gives you an actual-size print, hopefully only slightly off centre.
  6. Use Photoshop's controls in the Print Settings to nudge the image on the page.
  7. Untick 'Center Image'. Use positive or negative values to move the image up, down, left, or right. Your starting values should be close, but usually a few millimetres in either direction will sort things out. Iteratively adjust and re-print your test image until the black square is perfectly centred on the page.
  8. Write these values down, and enter them each time you print using this media size, to get properly centred images going forward.

What About Full Bleed Printing?

Very few printers will print full bleed to custom paper sizes, so it's best to plan for this in your design and leave at least 0.5cm around the edges, if not more.

If you really want full bleed printing, there are two options:

  1. Fool the printer by defining a custom size at least 0.5cm bigger than your actual page size. This is a tricky process, and you'll almost certainly get some ink bleed inside your printer and/or ink marks around the edges of your pages.
  2. Simply trim the paper down to the print area after printing. You'll lose maybe 0.5cm of the original size, but this is simple and gives a very professional result.

Let Us Handle the Centring and Trimming For You

Getting a custom size perfectly centred takes patience and a few test prints on your own printer — and full bleed on a custom size is fiddly even once you know the trick. If you'd rather hand this off, send us your file and the size you need: we can output it centred and trimmed to the exact dimensions you're after, full bleed included, without you burning through test sheets to get there.

Related Reading