Literally the number one most common support call we now get is that people can't print with correct colour on their Mac, or they are missing driver settings they know they should have.
Over and over people run into these issues - whether it's with a new install, or just spontaneously happens with a Mac OS update (point version or major).
The issue is that your printer starts to use the AirPrint driver - a driver which has very few options, and does not support colour management. It has a habit of resurfacing when you least expect it, so it pays to know how to spot it and fix it quickly.
Introduction
(We also address this, and just about all printer problems you're likely to hit, in our more general Solving Inkjet Issues article).
macOS's built-in printing system wasn't really designed with colour-critical, fine art printing in mind, and that shows up in a few consistent ways once you get into a professional print workflow. Anyone who's supported photographers printing from a Mac for any length of time will recognise the pattern.
This sits a little oddly alongside how well thought out and attractive the rest of the Apple ecosystem generally is. The root cause likely sits somewhere between Apple, the printer manufacturer and the driver software rather than with any one party - but regardless of where it originates, it's well worth knowing how to spot and work around it.
The most common issue has become the notorious incorrect driver problem. You can hit this one with a new install, or really at any time afterwards, particularly when you're doing Mac OS updates - and it comes up remarkably often given just how many queries we get - literally thousands upon thousands of them over the last 10 or so years, since AirPrint came along.
Check the 'Kind'!
In short, if you experience any significant colour shift with printing on the Mac, or you can't see settings you previously could see, or know should be there, then the first thing you should check on the Mac is what 'Kind' of printer your Mac says you're using.
Go to your System Preferences → Printers & Scanners and check what it says next to 'Kind' for your printer.
It should be something like 'Epson SC-P900 Series' - and only that (obviously the model number will vary!).
If it has anything else mentioned there - such as Airprint, or Gutenprint - you have the wrong driver installed.

Fixing The Wrong Driver Issue
The fix is (in theory) relatively simple. Remove the AirPrint printer, and re-add your printer, manually specifying the correct driver.
Make sure your printer is switched on, and connected as you normally do, while doing this.
Make sure you have actually installed the latest, full printer driver on your system, before you begin this fix. This is best done by visiting epson.com.au, selecting your printer and operating system, and downloading the full, latest driver package. Then double click that to being the install, as you normally would.
However - and this is where folks often go wrong - sometimes when you add a printer on the Mac, you have to wait a while before the proper Epson driver will actually show up in the list of available drivers. Or you have to choose the proper driver from the drop down options.
This is a good video showing the full issue, and downloading the latest driver and correctly installing the right driver version:
How to install the correct (non Airprint) driver for an Epson printer.
(The other big potential reason for a sudden colour shift is of course nozzle clogs - see Solving Inkjet Issues for more on that).
Permanently Solving Mac Printing Issues
We strongly recommend you look at bypassing the Mac printing system altogether. The reality is that if you print through Mac OS, using standard drivers, you will encounter frustrating and time wasting issues from time to time. The above issue may show up - repeatedly - during the lifetime of your printer. A lot of folks don't notice the change, but just experience a loss of print quality and think it's perhaps their printer getting old. It's not - printers that are fully functional (i.e. all nozzles firing) - will print with identical quality for years and years, even decades.
Really the best way to avoid all of these issues is to use a system like Mirage to print with. You will then be isolated and protected from all these sorts of issues, and you will also have a much more efficient and effective tool for all your printing.
We have an article about Mirage you might want to read:
Whilst Mirage can seem like a significant cost, the reality is you will save the price of Mirage in time, paper and ink, in very short order, if your print with any regularity.
It really is a vast improvement over printing with the standard Mac OS plus driver approach.
Or Skip the Driver Altogether: Let Us Print For You
If you'd rather not fight macOS driver issues at all - Mirage licence or not - remember you don't have to print at home. Send us your files and we'll print them on our own colour-managed, properly maintained equipment, so a rogue AirPrint driver never gets anywhere near your prints.
- Order Prints - our fine art printing service
- How to Prepare Files for Printing
