Your First A4 Print is On Us. Learn More

Please make an appointment before visiting the studio - other than your order collections.     PH: 03 9329 4522

Welcome to the new Image Science website!

Print Embossing

Print Embossing

What Is Print Embossing?

Print embossing, also known as print chop or print marking, is used in fine art printing to identify the artist and usually appears in the margins of the prints. It is a mark that demonstrates that the print is an original or edition print by the artist.

The mark is usually placed in the lower left hand corner of the page, but can also be placed under or in the printed image (anywhere within about 8cm from the paper edge). Much like a watermark, it does not draw attention to itself but is present to subtly show to clients that all care has been taken in the production of the print.

Getting Your Own Embossing Plates Made

You will have to have your own chop mark plates made and supplied to us before we can emboss your prints.

The fee to have a set of plates made is approximately $500 inc GST. They are designed for marking around 300gsm fine art paper, but work well with paper anywhere from around 180gsm to 400gsm (500gsm even, at a pinch and with some practise) — and even with other materials like canvas as well. They are circular, with a diameter of 48mm, and we suggest a mark of around 3cm diameter within this, which will be suitable for marking prints of A3 and above in size, and even A4 if sufficient white space is left on the page.

The Embossers We Use

The embosser we use (older plates) is a Justrite Long Reach Embosser. For newer plates (made from 2022 on) we use the Shiny Extra Long Reach Embosser.

Ordering Plates in Australia

In Australia, these have been carried locally here (Roeszler Engraving). You will need to liaise with them to have your plates made up to the correct specifications — and note that you need metal, not plastic, plates for the thicker fine art papers we use. Make sure you mention the press they need to be for. They will be able to supply artwork specifications etc. In general you want simple shapes, without sharp edges, but discuss all this directly with them. Note — you do not generally need to buy the press, unless you need one for yourself — you can just have the plates made. Of course, it's possible that you might later want your own press, and it's not unheard of for a press to become available, so buying your own press is a good idea if you can spare the funds, as the idea is the plates last for life. The brass plates work well with all the fine art papers we offer here.

The suppliers are:

Roeszlers Engraving — contact them via: sales@roeszlerengraving.com.au or on (03) 9696 1717 — https://roeszlerengraving.com.au/

How Our Embossing Service Works

Once we have your metal embossing plates stored here we can then mark your prints as we make them. We do not charge for this extra service currently, but might add a nominal fee in the future to cover the extra time/handling.

Works Well With Our Other Print Services

Embossing fits naturally alongside our Store and Print Service & Drop Shipping — once we hold your plates, we can emboss editions as we make and ship them, with no extra step required on your end. Because the plates are sized to work with paper from around 180gsm up to 400–500gsm, they're compatible with most of the fine art papers we stock.

Related Reading