At the recent 'Digital Show', I was not surprised to see those silly little purple 'light checker strips' being trotted out, once again. These things just will not die, and they drive me a little nuts.
If you haven't seen one, they look like this (corporate logos removed to protect the guilty!):
In human terms, there are two purple-ish colour strips next to each other, and the idea is you put this checker under your light source and if the two purples appear to be the same colour, then you have a good print viewing light, and if they appear as two different shades of purple you have a bad print viewing light. In more technical terms, the strips use a metameric pair of colours that look the same under 5000K light and not other light temperatures. The idea being that this then means the light source is a good version of a D50 light source and thus suitable for print proof work (with pretty much all of colour management being built around the D50 standard light source in the printing world.
Why the Test Doesn't Work
The only problem with this test is…it doesn't really work – it's both practically and conceptually flawed. It is conceptually flawed because it only pays attention to light temperature and not the overall ability of the light source to accurately replicate colour. That is, it only tells you (loosely) if the light source has a whitepoint of 5000K, but tells you absolutely nothing about the ability to reproduce colour across the full spectrum of light, or how close the light is to the spectral distribution defined by D50.
It is demonstrably flawed in practise as well. I know of three excellent light sources to evaluate prints in practise – daylight itself, Solux 4700K black backed lamps (near universally regarded as the best colour rendering artificial light source available), and for a cheaper but very effective alternative, the Grafilites. All three of these benchmark quality light sources fail this test (although not badly) – and yet all three of them actually have excellent overall colour rendition (technically, very high CRI scores – that's Color Rendering Index, and it's a measurement of the light's ability to reproduce colour accurately *across the whole light spectrum* – and not just for the whitepoint).
In fact, you can have a truly awful light source with huge spectral spikes that is quite awful for colour rendering, but happens to have a white temperature of 5000K, and despite being useless for colour proofing, it would sail past this test.
Whitepoint Isn't the Point
(You will note on the reverse of these strips they have a 'get out of jail caveat' ('metamerism is only one aspect yadda yadda etc') – but they still claim it's a 'very good indication' – well, for my money, it's not at all!). In fact, given the fundamental principle of colour management is chromatic adaptation (that is, the eye will balance happily to different whitepoints) – the actual whitepoint colour of the light is (within limits) pretty much the least relevant aspect of the light source!
We're not at all alone in our views on this – it's a point colour experts have made repeatedly on the public ColorSync mailing list too: judge a print viewing light by its full-spectrum colour rendering ability, not by whether two purple patches happen to look the same.
What to Look For Instead
If you're after a genuine print-viewing light rather than a party trick, look for a light with a high, properly measured CRI across the spectrum – not just a matching whitepoint. Our range of colour-accurate viewing lamps is built around exactly that.