We're asked about calibrators all day long. And one of the most common questions is - Spyder vs. i1Display Pro? Which is the best, and why?
We'll compare only the latest models - the Spyder5 and the i1Display Pro. The Spyder4 and all Spyders before it are not even close to the same class, and neither are the older i1Display V1/V2 units. If you're still using one of those (or you've got one in a drawer you're not even using!), it's time to upgrade - modern calibrators are all vastly better than these older ones and well worth the investment.
As of 2021, some X-Rite products - including the X-Rite i1 Display Pro - are undergoing a rebranding process and will shortly be known as the Calibrite ColorChecker range. The X-Rite i1 Display Pro will be rebranded as the Calibrite ColorChecker Display Pro.
We will keep referring to it as the i1 Display Pro in this article while the process is still underway, but if you find an X-Rite product to be unavailable and are directed to the Calibrite version instead, don't be alarmed - they might look a little different, but they are the essentially the exact same product! Read our blog post here for more details.
Today's equivalent models
This comparison was written when the Spyder5 and original i1Display Pro were current, and we've kept it largely as written because the underlying reasoning still holds. For readers shopping right now, the current-generation equivalents are:
- On the X-Rite/Calibrite side: Calibrite Display Pro HL and Calibrite Display Plus HL
- On the Spyder side: Datacolor Spyder Essential Colorimeter and Datacolor SpyderPro Advanced Colorimeter
You can browse the full range in our Monitor Calibrators collection or the broader Calibrators collection (which also covers printer and ambient light measurement devices).
Should you buy a combined monitor + printer calibrator?
As a rule, we recommend most folks buy an excellent monitor calibrator and (if they're doing their own printing) - use our custom profile service to make profiles for their favourite papers, as opposed to buying calibrators which can handle both monitors and printers.
We recommend this because the quality of results you get with this approach significantly exceeds the quality of results you'll get with a mid-range combined monitor plus printer calibrator solution like the ColorMunki (which is pretty good) or the SpyderPrint (which we've found to be not really very good at all). (If you're really experimental with your printing and want to try lots of papers, then the Munki is the best choice unless you have a much larger budget).
To this end, we also include a free printer profile - normally $50 - with every monitor calibrator purchase over $200. This is so out of the gates you're using the best approach.
So - which monitor calibrator should you buy?
There are two answers - the budget answer, and the best answer. Basically, if you want the cheapest option that is any good, you'll be spending around $200. For significant improvement, your budget will climb to $300+ - but you'll get a much better, more accurate device and much better future proofing as well.
The best answer: Calibrite Display Plus
The best answer is the Calibrite Display Plus from Image Science, with our unlimited lifetime product support.
It's without doubt the most accurate calibrator on the market at a reasonable price, highly reliable, easy to use, and compatible with every major after-market system for calibration you might find yourself using in the future - including Eizo's ColorNavigator, NEC's Spectraview 2, BenQ's PaletteMaster (inc. PM Elements), ArgyllCMS/DisplayCAL, and TV/video calibration systems like CalMAN, Lightspace CMS, and so on.
It is the industry standard professional calibrator, and the one we recommend to all folks who have the budget for it - we consider it an utterly essential tool for good results with digital imaging. The X-Rite (now Calibrite) Display line of calibrators have been the professional's choice for over 20 years now, and have a vastly better track record of reliability.
The new Display Plus model has been specifically enhanced to cope with modern high contrast displays (e.g. OLEDs). So it's the most future proof option as well. At only a small premium over the plus model, we think this is the one most people should now go for.
The budget option
If the budget is tight, then the basic ColorChecker Display model is the way to go.
But do note, this device is NOT compatible with hardware calibration systems (like Eizo's ColorNavigator, BenQ's Palette Master etc) - and cannot be made to compatible.
Thus this is only worth considering if you're completely sure you'll never upgrade to a hardware calibration monitor.
Long term experience has shown that a lot of folks who go budget with their monitor calibrator do end up regretting it, and ultimately re-purchasing a Pro/Plus later - so do consider carefully if the savings now are worth the potential need to re-purchase a better calibrator later.
What about the SpyderX Pro?
The SpyderX Pro is also worth considering, but closer again in price to the Calibrite options, and we do have some concerns about the company, historically (see below).
The SpyderX Pro is good value, to be fair, and it can be used with hardware calibration systems as well. Our chief concern here is with the company, more than the product, and their track record which is a bit chequered (e.g. releasing Spyder3s with dodgy filters, resulting in literally years of faulty calibrations and support issues for us to deal with!). To be fair, that was many years ago, and we've not had reports of any such issues in a long time. It's just that, in all, we trust the X-Rite (now Calibrite) products so much more as their track record for accuracy and reliability is so much better.
The SpyderX Elite costs about the same as the Calibrite products, but are much less widely supported and simply don't have the reputation and reliability record of the X-Rite/Calibrite products.
Below were our thoughts at the time the i1Display Pro (now Calibrite Display Pro) - and the Spyder5 range were current.
The SpyderX range no longer uses the cheap, exposed filter design from the Spyder 1 through to 5 models. This should increase the longevity of these units, one presumes. But at this point the Display Pro design is over 10 years old and still performing superbly - so it's thoroughly proven. We're yet to see if the X range really solves the planned obsolescence issues of the previous 5 generations of the Spyder products. Fingers crossed!
Why we rate the i1Display Pro higher
The i1Display Pro is, we think, the best monitor calibrator that's ever come along & offers an absolutely great level of performance for its cost (noticeably lower than previous pro level calibrators).
Here are the many reasons we think it's better:
- Accuracy - every decent test we've ever seen, and our own testing, shows the i1 to be a distinctly more accurate sensor than the Spyder range, particularly in deep shadows. When compared against lab grade meters (those which mere mortals cannot afford!), the i1 holds its own remarkably well.
- Profile Quality - it is not uncommon for Spyder5s to induce banding post calibration, particularly on lower quality displays. It's not unheard of with the i1Display either, but we've found the smoothness in such situations is always noticeably better with the i1Display.
- Repeatability/Longevity - the i1Display Pro uses a sealed design, and very high quality dichroic filters. We have a unit from 2012 here and we can as yet not detect any change in its measurement accuracy. Our own testing over many years, and anecdotal reports, indicate 2 to 3 years is the best you can get from Spyders - this is because they use more basic, exposed to the air filters, and those filters change their behaviour over time quite noticeably in our experience.
- Field Upgradeable - the i1 is a field upgradeable sensor - that is, it can be updated in the future for new monitor trends (or if a particular batch of calibrators shows some sort of trend in drift).
- Speed - calibration is (let's face it!) - boring, so you want it to be done fast (but still properly!). The i1Display Pro has a large light gathering lens - and because of this it can read colours more accurately, and more quickly. It takes about half of the time as the Spyders on average.
- Compatibility - as the industry standard professional colour measuring tool, pretty much all after-market software is made to be compatible with the i1Display Pro first and foremost. This includes all major monitor colour accurate vendors (Eizo, NEC, BenQ). Those vendors actively recommend the i1Display Pro as well - for example, Eizo tell us that the Spyder is incapable of individually measuring the R, G, and B gammas in deep shadows, leading to considerably poorer results in those deep shadows. The same goes for packages geared more at video editing such as CalMAN and Lightspace CMS - they're all compatible with, and recommend, the i1Display Pro.
- Price - only marginally more expensive than the distinctly inferior Spyder5 Pro, and vastly cheaper than the Spyder5 Elite - at around $350 it's just far better value than the Spyder5s.
In all honesty, it's quite unusual that a choice between products is so clear cut - the i1Display Pro is simply the only sensible option in professional calibrators right now.
The price, for beginners, can seem a lot, but what price can you put on accuracy? And sure, if you're using a really bad monitor you should probably upgrade your monitor first (see our Monitor Recommendations and Guide to High Quality Imaging Monitors) - but calibrators pay for themselves by stopping you wasting time making mistakes.
A practical example - if you miss the white balance when processing your RAW files by just a few hundred Kelvin - and this is all too easy to do on common set-ups in common use like uncalibrated iMacs - then this is a colour error you're introducing to all your files, and one that is essentially uncorrectable in downstream corrections (and one that will be reflected in all your prints as a certain muddiness).
If you want that sort of clean colour purity that top photographers achieve and that give their images the professional edge, you need calibration. Literally thousands of people have told me 'they're pretty happy with their screen to print match at the moment' and questioned whether they really need a good calibrator. And not one of those people has ever expressed regret to me after the purchase of a calibrator.
Like any calibration device it takes some time and knowledge to get the best results from it, which is why we have an excellent and very popular guide for this calibrator.
Lifetime support, included
More importantly, when you buy it from Image Science you get our legendary lifetime support - you're welcome to email or call us at any point in the future with questions about your i1Display Pro (or its current Calibrite equivalent).
We've been offering this level of support for 15 years now and believe me - people can and do call on our support literally years later, for all sorts of reasons. Put simply - nobody knows these products, and their real world use, better than we do - we use them daily in our very busy fine art printing services here at Image Science, and we practise constant process improvement at all levels to make sure we're getting the absolute best out of our equipment - and you benefit from this pool of knowledge every time you draw on our articles or support.
We're always happy to help!
There are many other reviews out there comparing the Spyder range and the i1 on the web, and no serious review we've seen has ever concluded the Spyder5 is as accurate as the i1Display Pro, so don't just take our word for it - we encourage you to do your own research.
If you trawl the AVS forums (which is where some of the leading cinema and home theatre installers/calibrators hang out), you'll see the actual developers of industry leading video calibration packages like CalMAN and Lightspace CMS directly comparing the two. (We can save you the reading though, they all conclude the i1Display Pro is the one to go for!).